DELLNER BUBENZER

EBN-2St

EBN-2St

Torque:
4350 Nm

The EBN is a powerful drum brake with automatic wear adjustment.

  • According to DIN 15435 standard
  • Continuously adjustable brake spring enclosed in a square tube with torque scale
  • Self-lubricating bushings mean brakes are easy to service, no greasing necessary
  • Equal air gap by adjustable lever stops
  • Up to size 400:
  • Levers and base plate made of nodular cast iron
  • From size 500:
  • Levers and base plate made of welded steel
  • Different thrusters
  • Aluminum brake shoes acc. DIN 15435 Bl. 2 with non-asbestos, organic linings
  • Shoe clamping springs which prevent brake shoes from tilting when released
  • Pins and main spindle of stainless steel
  • Uncoated parts and screws of stainless steel
  • Automatic wear compensator
  • Limit switch release control
  • Limit switch wear control
  • Proximity switch hand release
  • Manual release lever with or w/o interlock
  • Monitoring systems (e.g. VSR/CMB)
  • Brake drums with hubs or couplings
  • Weather execution (special paint and coating) for outdoor use

Additional PRODUCTS

DELLNER BUBENZER's Anti Sway Systems allow the damping of head-block, spreader and container oscillation generated by acceleration / deceleration of trolley and gantry.

BAC

The BAC-brakes is used for stopping and/or holding of fans, blowers, wind turbines, coilers, crane slewing and travel gears etc.

A hydraulic active yaw brake with GL Type Certification and braking force of 620 kN.

BHB

Band Brake for large torque applications that can be used for emergencies or back up braking needs. Band Brakes have been around for many years and we offer many ways to operate via thruster, air, hydraulic or hand wheel.

The BOSS® system has been developed based on the experience with the SOS system that has been already installed in more than 200 container cranes world wide.

The BCMS-4 is a micro-controller-based monitoring and switching device for spring applied brakes of the SFB and KFB series.

The Brake Control Unit BCU 2001 records characteristic current and voltage variations, which are induced by movements of the armature disk in the magnetic field of the brake coil.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane. They are hydraulic powered with HPU or BUEL® G.

Designed for all rail mounted equipment, like cranes, stackers, reclaimers, etc. Direct holding of idle wheels, particularly where rail clamps or rail brakes cannot be used.

The high capacity of these brakes makes them particularly suitable as service- or secondary emergency brakes e.g. on hoists, slewing drives and belt conveyors.

The BUEL® Model G is a new family member of the DELLNER BUBENZER brand BUEL®. It is a compact thruster to feed active or passive hydraulic brakes and emergency brakes.

The BUEL® Model H is a family member of the DELLNER BUBENZER brand BUEL®. BUEL® thrusters are used for almost all kind of industrial applications.

The BUEL® Model S is a brand new family member of the DELLNER BUBENZER brand BUEL®. It is designed for wheel brakes on rail mounted cranes, where high pulling forces for mechanical wheel brakes are required.

Compact status monitoring system for a brake system with display and fieldbus interface.

Compact status monitoring system for a brake system with display and fieldbus interface.

Compactus is a pneumatically operated hydraulic pump system that multiplies pneumatic line pressure into hydraulic pressure that is sufficient to operate pressure applied disc brakes at rated capacity.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.